|
SKIDMORE Torque Wrenches
Skidmore Torque Wrench Model Code Explanation
Preset Square (Fixed) Head Preset Ratchet
SE 40 S SE 40 R SE – Stands for Skidmore Engineering SE – Stands for Skidmore Engineering 4, 5, 6, 7, 8 or 9 - Stands for standard torque range 4, 5, 6, 7, 8 or 9 - Stands for standard of the wrench torque range of the wrench 0 – Stands for ¼” or 2 for 3/8” or 3 for ½” 0 – Stands for ¼” or 2 for 3/8” or 3 for ½” S – Stands for square (fixed) head R – Stands for ratchet head
Presets
SE 418 B SE – Stands for Skidmore Engineering 400 or 500 or 600 or 700 or 800 or 900 – Stands for the standard of torque capacity by range of in. lbs to ft. lbs. 18 – (The last two numbers) represents the wrench end size by using the fraction size 18/32 and then reduced to 9/16” for American Standard sizing. If an “M” appears in the last initial of the model number then the wrench end is in metric sizing and the 18 stands for 18mm. ( SE 418 BM) NOTE – the last initial (s) tell us what type of wrench end to put on the torque wrench B or BM - Stands for Box Head or Box Head Metric
* * * Other Wrench Codes * * *
E or EM - Stands for Open End or Open End Metric FN or FNM – Stands for Flare Nut or Flare Nut Metric H or HM – Stands for Hex or Hex Metric
Preset Quick Change Adjustable Ratchet
SE 422 QC SE 00 RA SE – Stands for Skidmore Engineering SE – Stands for Skidmore Engineering 4 – 400, 500, 600 or 800 stands for the standard 0 – Stands for ¼” ratchet head torque capacity 02, 12 & 22 – Stands for 3/8” ratchet head 422 – Stands for 7/16” hole tang size 33 and 44 – Stands for ½” ratchet head 532 – Stands for 9/16” hole tang size 55 and 65 – Stands for ¾” ratchet head QC – Stands for Quick Change RA – Stands for Ratchet Adjustable |